1. Download the appropriate driver from below
2. Save to a place on your hard drive (desktop is good)
3. double click on file to extract and install files

1. Download 32Bit Vista or 64Bit Vista
2. Uncompress the files to your hard drive
3. Go to Start/Settings/Printers and add a new printer
4. Choose a local printer (even though it's networked)
5. Choose Create a New Port then choose Standard TCP/IP port
6. In the Hostname field type tlab7.design.iastate.edu (the port field will also fill in automatically)
7. Click Next
8. Now you'll get a screen that says "Additional Port Information Required" Click on Custom then Settings
9. In the Protocol section, change from Raw to LPR
10. In the LPR settings section, type KIP2002 in the Queue Name field
11. Click the LPT Byte Counting Enabled box
12. Click OK
13. Click Next
14. Click on Have Disk
15. Change the location to the place where you installed the printer drivers in step 2
16. Click on plotter.inf and click open
17. Now choose KIP 2000 Series in the Install Printer Driver window (may have to click Next)
18. Then give the printer a name and click next
19. That should do it!

For AUTOCAD instructions, click here

Mac OSX Instructions

1. There are no drivers for OSX yet.

• Windows XP/2000